? 2017 littelfuse, inc. specifcations are subject to change without notice. revised: 10/02/17 rohs LSIC2SD120A10 features ? positive temperature coeffcient for safe operation and ease of paralleling ? 175 c maximum operating junction temperature ? excellent surge capability ? extremely fast, temperature-independent switching behavior ? dramatically reduced switching losses compared to si bipolar diodes maximum ratings characteristics symbol conditions value unit repetitive peak reverse voltage v rrm - 1200 v dc blocking voltage v r t j = 25 c 1200 v continuous forward current i f t c = 25 c 28 a t c = 125 c 15 t c = 151 c 10 non-repetitive forward surge current i fsm t c = 25 c, t p = 10 ms, half sine pulse 80 a power dissipation p to t t c = 25 c 136 w t c = 110 c 59 operating junction temperature t j - -55 to 175 c storage temperature t stg - -55 to 150 c soldering temperature t sold - 260 c description this series of silicon carbide (sic) schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175 c . these diodes series are ideal for applications where im - provements in effciency, reliability, and thermal manage - ment are desired. case 12 2 1 case circuit diagram to-220-2l applications ? boost diodes in pfc or dc/dc stages ? switch-mode power supplies ? uninterruptible power supplies ? solar inverters ? industrial motor drives ? ev charging stations pb ? littelfuse rohs logo = rohs conform ? littelfuse hf logo = halogen free ? littelfuse pb-free logo = pb--free lead plating environmental rohs pb gen2 sic schottky diode LSIC2SD120A10, 1200 v, 10 a, to-220-2l
? 2017 littelfuse, inc. specifcations are subject to change without notice. revised: 10/02/17 characteristics symbol conditions value unit min. typ. max. forward voltage v f i f = 10 a, t j = 25 c - 1. 5 1. 8 v i f = 10 a, t j = 175 c - 2.2 reverse current i r v r = 1200 v , t j = 25 c - <1 100 a v r = 1200 v , t j = 175 c - 10 total capacitance c v r = 1 v, f =1 mhz - 582 pf v r = 400 v, f = 1 mhz - 53 v r = 800 v, f = 1 mhz - 40 total capacitive charge q c v r = 800 v, - 57 nc electrical characteristics footnote: t j = +25 c unless otherwise specifed thermal characteristics characteristics symbol conditions value unit min. typ. max. thermal resistance r jc - - 1. 1 c/w q c = v r c(v)dv 0 figure 2: typical reverse characteristics figure 1: typical foward characteristics 0 2 4 6 8 10 12 14 16 18 20 - 0. 50 .5 1. 52 .5 3. 54 .5 forw ar d vo lt ag e (v ) for war d curre nt (a ) t j = 25 c t j = 125 c t j = 150 c c t j = 17 5 reve rs e cu rre nt , i r (a ) 1e -8 1e -7 1e -6 1e -5 1e -4 02 00 400 600 8001 0001 200 reve rs e vo lt ag e , v r (v ) t j = 175 c t j = 150 c t j = 125 c t j = 25 c gen2 sic schottky diode LSIC2SD120A10, 1200 v, 10 a, to-220-2l
? 2017 littelfuse, inc. specifcations are subject to change without notice. revised: 10/02/17 figure 5: capacitance vs. reverse voltage figure 6: capacitive charge vs. reverse voltage figure 4: current derating figure 3: power derating 0. 00 20. 00 40. 00 60. 00 80. 00 100. 00 120. 00 140. 00 160. 00 25 50 75 1001 25 1501 75 po we r (w ) ca se te mp er at ure ( c ) 0 20 40 60 80 100 120 25 50 75 1001 25 150 175 ca se te mp er at ure (c ) forw ar d curr en t (a ) 10 % du ty 30 % du ty 50 % du ty 70 % du ty dc 0 100 200 300 400 500 600 11 01 00 1000 capaci ta nc e (p f) vo lt ag e (v ) 1000 0 10 20 30 40 50 60 70 02 00 400 600 800 100 0 capaci v e charge ( nc ) vo lt ag e (v ) gen2 sic schottky diode LSIC2SD120A10, 1200 v, 10 a, to-220-2l
? 2017 littelfuse, inc. specifcations are subject to change without notice. revised: 10/02/17 packing options part number marking packing mode m.o.q LSIC2SD120A10 sic2sd120a10 tube 1000 part numbering and marking system sic2sd120a10 sic = sic diode 2 = gen2 sd = schottky diode a = to-220-2 l yy = year ww = w eek yywwe zzzzzz-zz e = s pecial code zzzzzz-zz = lot number l f 120 = voltage rating (1200 v) 10 = current rating (10 a) figure 7: stored energy vs. reverse voltage figure 8: transient thermal impedance 0 5 10 15 20 25 0 200 400 600 800 1000 stor ed en er gy (u j) vo lt ag e (v ) 1. 00e- 03 1. 00e- 02 1. 00e- 01 1. 00e+ 00 1. e -- 06 1. e- 05 1. e- 04 1. e -0 31 .e -0 21 .e -0 11 .e +0 0 puls e wi dt h (s ) norm aliz ed tr an si en t th er ma l im pe da nc e sing le 0. 01 0. 02 0. 05 0. 1 0. 3 0. 5 gen2 sic schottky diode LSIC2SD120A10, 1200 v, 10 a, to-220-2l
? 2017 littelfuse, inc. specifcations are subject to change without notice. revised: 10/02/17 dimensions-package to-220-2l d cc a1 notes: 1. dimensions d & e do not include mold flash . mold flash shall not exceed 0.127 mm per side. these dimensions are measured at the outermost extreme of plastic body . 2. dimensions e2 & h1 define a zone where stamping and singulation irregularities re allowed. ~4.5 "a" detail "a" scale 2:1 mold flas h (refer to notes) r ?1.550xdp0.1 ejector pin phil 1.00 mm character heigh t country of origin r0.5(2x) mold gate 5 1 5 1 matte finish top & side all other sides are shiny finish a2 e e1 a e e2/2 h1 d1 l1 d l section c-c section d-d ?p e1 q d2 b3 b2 c1 c c1 c b1 b plating base meta l plating base meta l recommended solder pad layout unit: mm 1.93 5.08 2x r0.62 symbol millimeters min nominal max a 4.320 4.450 4.570 a1 1.140 1.270 1.400 a2 2.500 - 2.740 b 0.690 - 0.880 b1 0.680 - 0.870 b2 1.230 - 1.390 b3 1.220 1.270 1.380 c 0.360 - 0.503 c1 0.630 - 0.527 d 14.900 - 15.600 d1 8.615 - 9.017 d2 12.840 - 12.950 e 10.000 10.180 10.360 e1 7.570 7.610 7.680 e1 2.490 2.540 2.590 e 5.030 5.080 5.130 h1 6.295 6.545 6.795 l 13.000 13.500 14.00 l1 2.390 - 3.250 p 3.710 3.840 3.960 q 2.650 - 3.050 r - - 0.254 gen2 sic schottky diode LSIC2SD120A10, 1200 v, 10 a, to-220-2l
? 2017 littelfuse, inc. specifcations are subject to change without notice. revised: 10/02/17 packing specifcation ( tube for to-220-2l ) 4 0.127 4 0.127 4 0.127 4 0.127 532 0.50 519 0.50 6.50 0.20 6.50 0.2 blue markings, centered on tube length marking surface 16.8 3.9 7 0.20 7 0.20 5.50 3.10 0.05 5.9 0.1 2.10 0.75 0.10 31.40 0.20 2 5 8 9 4 3 1 7 6 notes: 1. material transparent extruded pvc with antistatic dipping 2. radius : 0.5 maximum unless otherwisen specified 3. critical areas : labelled in box 4. all pin plug holes are considered critical dimension 5. marking font type : times new roman, 3.12 0.127 in height 6. material thickness : 0.75 0.10 7. tolerance unless otherwise specified: decimal: 0.05 angle: 1 8. unit : millimeter (mm) detail b detail c disclaimer notice - littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable littelfuse product documentation. warranties granted by littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable littelfuse documentation. littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by littelfuse as set forth in applicable littelfuse documentation. the sale and use of littelfuse products is subject to littelfuse terms and conditions of sale, unless otherwise agreed by littelfuse. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability of and test each product selected for their own applications. littelfuse products are not designed for, and may not be used in, all applications. read complete disclaimer notice at www.littelfuse.com/disclaimer-electronics . gen2 sic schottky diode LSIC2SD120A10, 1200 v, 10 a, to-220-2l
|
